FeaturedTips

5 steps to handle a tire burst while driving

Do not apply your brake pedal during the blowout since it worsens the imbalance of the vehicle.

Serious accidents coming from tire bursts recently have triggered the public awareness of dealing tire burst incidents.

As reported by FRSC, tire burst ranks as the most feared accident by motorists on the highway since a tire blowout will take the driver off control over their vehicle, especially, if it happens with MUVs or SUVs, it can even flip the vehicles over.

Tire burst ranks as the most feared accident by motorists on the highway

Although high technology has been frequently added to improve tire quality, dangers from tire blowout are still there; So it is essential to learn 5 steps you should know to better deal with a tire burst while driving.

1. First step:  Adopt a habit of driving with a safe speed

The lower the speed is, the higher chance you survive and the less damaging the accident would be.

2. Second step: Do not apply your brake pedal during the blowout

This one is tricky as our brains are wired to urge for the brakes when something suddenly astounds us. That said, hard braking seriously worsens the imbalance of the vehicle in the event of tire bursting.

Applying the brake pedal

Do not apply your brake pedal during the blowout since it worsens the imbalance of the vehicle

3. Third step: Slowly release the accelerating pedal

Don’t disengage the accelerator abruptly. In fact, it is recommended that you keep the same force on the accelerator for a short while before gradually releasing it. In case you’re on cruise control, disengage it right away.

Also Read:  Understanding True Confidence and How to Achieve it

4. Fourth step: Make sure your car keep going straight on

If your vehicle is pulling to one side, it is critical that you pull the steering to the opposite direction to keep it pointed straight or you may collide with surrouding vehicles.

Video: Sudden Tire Blow-Out Safety

5. Fifth step: Keep your composure

Don’t try to make unnessary control. While the most important thing in this misfortune is to keep balance, an overly sharp yank on the steering wheel may lead to a rollover.

6. Sixth step: Get to the roadside safely

Let the vehicle take its course to a halt. You should only apply the brake pedal when your car is going really slowly and almost reach a stop. Signal the turn and get to the roadside. When already being at the roadside, make sure the hazard lights are on to give signs to approaching vehicles to steer away off.

A car pulls over with hazard lights on

 Make sure the hazard lights are on to give signs to approaching vehicles.

Source: naijauto

Related posts

Business needs one should always keep an eye on

Genart

How to Control Your Social Anxiety

Genart

The effects of removing carbs from the diet regime

Genart

How to streamline workflow and power up your productivity

Genart

How to clean common surfaces during the COVID-19 outbreak

Genart

Choosing a Surgeon, Simplified

Genart

Leave a Comment